Solar Panel Set up – Materials Needed and Its Procedure

We’re all encouraged to conserve energy if we want to bestow a better future for the children of tomorrow. The risk of depleting resources has pushed humans to look for different energy resources which can be both efficient and renewable. Probably top-of-the-line sources of energy is the sun. Solar energy is converted into usable energy by PV cells present in solar electric panels. There are completely different ways of solar panel set up relying on the type of roof and energy required by the user.

A household who needed to make use of solar energy in all their electrical needs should buy solar electric panels from a wide number of producers or might research online. Solar panels are normally mounted in roof and building tops, or installed using stand alone facilities the place it can get one of the best sun exposure. Solar panel installation may be achieved by homeowners using the set up suggestions found on the web or may be achieved by a professional solar panel installer. The PV cells are usually encased collectively in a metal frame, more often than not aluminum.

This will enable the panels to be screwed or clamped simply on roofs. The materials wanted for set up are: roof anchors which are made of steel or aluminum, it is used as the base of the mount and where the mounting frame is connected; the mounting frame that’s secured to the roof anchors utilizing a particular locking system and bolts to screw it tightly, it is the place the panels are connected using clamps; and the final materials you need is the clamp, used to safe the solar panels on the mounting frame. The clamps may be end-clamp and mid-clamp depending on the number of panels that must be secured.

After you may have all the parts wanted for solar panel set up, the process can now begin. Most of the installation team will survey the world most especially the situation the place it is mounted.

• Scaffolding. This is actually placed by the set up workforce earlier than the set up process begins. It is normally erected to reach the roofs for simple mounting. Ladders are incorporated to ensure safety in accordance with the Health and Safety codes.

• Positioning the roof anchors. Earlier than these are put in to the roof, it is first surveyed, properly measured and marked to point correct positioning of panels. Positioning section is very vital in every set up to make sure that the panel frames are in its appropriate locations.

• Attaching the frame. After the roof anchors are secured properly on the roof, the aluminum mounting frame or bars are attached. There’s a need to make sure that these are parallel to one another earlier than locking it in place.

• Putting in PV panels. This is done after the bars where the frame is placed are mounted properly. It could be in rows or columns depending on its roof space.

• Wiring the panels. These panels should be wired collectively to produce a whole electrical system.

For each solar panel set up, it is critical to plan it first before undergoing the mounting procedure. It is usually advisable that it is done throughout roof building or re-roofing.

Leave a Reply